How to judge a good brick
A well-fired brick is uniformly deep red, has sharp straight edges, rings when two are struck together, and does not crumble at the corners. Under-fired bricks look pale, sound dull and absorb far too much water.
We supply first-class red clay bricks from kilns around the Siliguri belt — well fired, consistent in size and low in breakage, so your masons lay faster and your plaster thickness stays under control.

A well-fired brick is uniformly deep red, has sharp straight edges, rings when two are struck together, and does not crumble at the corners. Under-fired bricks look pale, sound dull and absorb far too much water.
A 9-inch (230mm) wall takes roughly 90 to 100 bricks per square metre, and a 4.5-inch partition wall about 45 to 50. Add 5 percent for breakage and cutting.
Dry bricks pull water out of the mortar and weaken the joint. Soak them for a few hours before laying, and let the surface water drain off before the mason picks them up.
Yes. We supply first-class burnt red clay bricks by the thousand and in full truckloads to residential and commercial sites in and around Siliguri.
A well-fired brick is uniformly deep red, has sharp straight edges, rings when struck against another brick and does not crumble at the corners. Pale, dull-sounding bricks are under-fired and absorb too much water.
A 9-inch wall takes roughly 90 to 100 bricks per square metre, and a 4.5-inch partition around 45 to 50. Add about 5 percent for breakage and cutting.
Yes. Dry bricks pull water out of the mortar and weaken the joint. Soak them for a few hours and let surface water drain off before the mason lays them.
Builders, contractors and homeowners across Siliguri collect from our yard at Dumping ground, 4310/ New Zila Parisad Road, Don Bosco Colony, Bhaktinagar, Salugara, and we load regularly for sites in Darjeeling, Kalimpong and Sikkim. Tell us where the material has to reach and we will confirm the delivery slot before you place the order.